CHINON ZOOM LENS Spezifikationen

Chinon GS-7 (Genesis) This camera manual library is for reference and historical purposes, all rights reserved. This page is copyright by mike@butkus.

-- Nothing appears on the LCD panel. * Battery life: Approximately 36 24-exp rolls, using 50% flash (Chinon laboratory testing) (Memory Backup System)

D. Automatic Film Loading The film should be loaded into the camera carefully, without being subjected to direct sunlight. 1 ) Open the back cover by

the end of the film reaches the film tip mark on the back of the camera. When the back cover is opened, do not touch the inside of the mirror housing.

1 ) Frame counter 2) Self-timer 3) BLC (backlight control) 4) Battery check 5) Multiple exposure H. Controlling the Image Size by Using the Zoom The t

1. Auto focus Shooting 1 ) Place the AF mode button to the single AF mode position for most forms of photography. (Fig. 10) 2) Position the camera so

is the area in which the infrared ray is most precisely controlled. Water surface, car bodies, glass and similar objects which easily reflect light. A

K. Attaching the Hand Strap and the Lens Cap The hand strap and the lens cap can be attached to the camera as shown in the diagram. (Fig. 16) A. Con

B. Auto Focus Modes (1) Single AF Mode(s) This setting is ideal for general picture taking as it incorporates a built-in focus lock and subject too cl

2) Look into the viewfinder and point the auto focus frame on the center of the subject that is to be in focus. Press down gently on the shutter relea

Fascinating macro close-ups of subjects can be taken at distances between 50 to 85 cm (19.5" to 33.2').1 ) Set the zoom lever to the tel

TABLE OF CONTENTS Nomenclature 3 Specifications 6 SIMPLIFIED GUIDE (BASIC LEVEL): A. Battery Installation 15 B. Battery Check 15 C. Setting the Film S

Multiple (Two) Exposures in Single Mode 1 ) Set the Single/Continuous Switch to the SINGLE position. (Fig. 27) 2) Press the multiple exposure button.

NOTE: * 1. Reversal (slide) film is not recommended for use with the multiple exposure feature. Prior to developing and printing the film, the photo

switch to "OFF". The self-timer will be canceled automatically if the shutter release is not pushed within 30 seconds of originally activati

The " " flash mark will light when the shutter release is depressed in the following cases: 1 ) When the mark glows constantly, the flash

(Fill-in Flash Mode <daylight sync>) Under some available light conditions (deep shade or backlit situations) a picture may result where the s

I. Filter and Hood Use the filter ring which is designed specially for the Chinon Genesis camera. It enables 62 mm filters to be used with the camera.

when the subject is beyond the effective flash range of the camera's built-in sensor flash. The Auto GS-320 flash unit will also permit bounce fl

With the optional slave unit (SE-520), a hot shoe type automatic flash unit having an F number setting can be used as an external flash unit with the

The lens cap of the Chinon Genesis is designed to slope on to the camera's eyepiece. When the self-timer is operated, the lens cap should be att

G. LCD Panel Display 21 H. Controlling the Image Size by Using the Zoom 23 I. Auto focus Shooting 25 J. Automatic Film Rewinding 27 K Attaching the Ha

1. LCD indication 2. Retractable Flash 3. Shutter release button 4. Main switch 5. Self-time indication LED 6. Auto focus window 7. Lens 8. BLC (Ba

11. Zoom lever 12. Back cover release button 13. FILL-FLASH switch 14. OFF-FLASH switch 15. Manual rewind switch 16. Viewfinder eyepiece 17. Film re

Type: motorized fully automatic 35 mm AF lens shutter compact camera with Single Lens Reflex viewing system with built-in sensor flash and LCD indicat

Shutter release: Focus priority shutter release for single frame shooting and action priority shutter release for continuous shooting mode. Exposure:

Guide No.: 12 (ISO 100) Flash range (lSO 100): Wide: 0.5-4.0 m (2.8'-13.1') Tele/Macro: 0.5 - 2.7 m (1.6'-8.9') Daylight sync.: Po

1) Insert a pointed object such as a ball-point pen into the battery cover release hole on the bottom of the camera and slide it in the direction indi